Gopro Hero 11 Black profile

1

Hello,

I just replaced my 2 Gopro Hero 8 for 2 brand new Gopro Hero 11 but I forgot to put them in a compatible mode from the actual available configuration.

Is it possible to create custom calibration for the mode I used.

Next time I’ll use a 5.3K mode that is already available.

The mode I use is : 4K 4:3 | 30 | W

Thanks

2

I remember, I’ll film the template in the mode and include a link to the video tomorrow.

3

Here is the link for the video.

I used a 11" x 17" paper (279.4mm x 431.8mm) with 25mm grid.

4

Save this as a json file and then open it in the camera selection dialog using the ‘Load from file’ button:

{
  "distortion_coefficients": [ 0.178038, -0.047301, -0.000202, 0.000232, 0.008167, 0.430001, -0.068964, 0.011957, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000],
  "intrinsic_matrix": [ 1673.455201,0.000000,1992.876165,0.000000,1672.103196,1493.714729,0.000000,0.000000,1.000000]
}
5

The stitching worked but there is a little bit os asymmetry but it is ok for analysis.

image
image1920×768 227 KB