Hi how are you!
im trying out the software and the only gopro cameras i can get 2 of are the hero 13 black. would that impact the stitching in any way, as the lens is 12mm instead of 16mm. also, should i change anything about the 3d printed mount you posted too?
appreciate it loads
Hani
You’ll need to record a calibration video like this: https://download.actionstitch.com/calibration_sample.mp4 .
There are a few things to note:
- Use identical settings for both calibration and game videos. For example, disable stabilization, and ensure the same field of view (FOV) mode (wide/linear/etc.) is used.
- Don’t be too far or too close to the checkerboard. Move the camera around such that the checkerboard can cover most of the screen over time. At each position pause for a second – this helps reduce blurriness when extracting images from the video.
- You can download a checkerboard from Calibration Checkerboard Collection | Mark Hedley Jones (like the A2 25mm one) and show it on a large TV or monitor.
As for the mount, I think you can use the mount made for GoPro 10 as the size hasn’t changed from 10 to 13.
amazing and where should i send this video or how?
You can upload the video to Google Drive or Dropbox and share the link with me via PM.
appreciate it loads
thank you